Why Your Rolls Royce Remote Key Isn't Working
If you're Rolls Royce Phantom key remote isn't working it could be due to one of the issues listed below. It could be due to a dead coin battery, water damage or an inoperable chip that needs to be reset.
rolls royce key replacement should be stored in a dry location away from electrical or wet areas. If you've tried this and it does not work, try these steps:
Fault Diagnosis
Rolls Royce has a reputation as a well-established modern, sophisticated brand of automobiles that is committed to excellence. Regular maintenance is important to avoid costly and time-consuming problems in the future. The most important maintenance task is to clear and read fault codes. Fault codes are tiny SOS messages sent by your vehicle's complex electronic system. It's like not taking care of a cold that is persistent - they could be a sign of a deeper issue.
There are many reasons your key fob might stop working. This could be caused by an inoperative coin-cell battery, water damage or interference in the signal, receiver module problems or a malfunctioning chip. If you've tried everything from replacing the battery to reprogramming it, and the issue persists, it's best to take your Rolls Royce in to a professional to further troubleshoot.
The battery is the first thing to check when a key fob isn't working. The most common cause of the key fob not functioning is a drained coin-cell battery. It is vital to replace the battery with an alternative button-cell battery with the same size, voltage and specifications as the original. It is also recommended to store the key fob in a safe place and away from any objects that could cause mechanical damage, like keys or coins.
After you've replaced the battery, you need to make sure that all metal retaining clips are in place and not creating contact issues. Also, make sure that the battery isn't dirty or corroded. If the battery is not a genuine replacement for Rolls-Royce, it could be damaged by defective components and could cause the receiver module to malfunction, or even make the doors unlocked.
Faulty Receiver Module
If the key fob has stopped working after a few days and you have tried everything (replaced coin battery, reprogrammed key or even bought an extra) it could indicate that there is a problem with the receiver module, which is responsible for receiving and decoding the remote control signals. This is particularly relevant if you are able to use the key fob in an alternative vehicle and it works.
The receiver modules in the key fobs are fitted with metal clips that are used to hold the battery and complete the circuit on the activation of the buttons. They can become damaged or bent, which can cause the key fob to receive the correct signal to unlock/lock the car. The receiver module can also stop working due to an incompatible chip.
Faulty key fob
If your device stops working, it could be due to a number of factors. The most common issue is typically a dead battery in the coin-cell. It is easily replaced in just a few minutes. Damage to the receiver module, water issues or signal interference could cause the key fob to cease working. You can check for these problems by disassembling the key fob and applying isopropyl alcohol or electronic cleaner to the chip within.
Another reason could be worn buttons. Remote controls for key fobs in cars have rubberized buttons that can wear out or become loose over time. This causes an inability to press the button and the designated pressure point, which causes it to stop working. It is easy to fix most key fobs home. Simply disassemble the key, remove the buttons, and then clean them. Soldering them back in place will restore the functionality.
Other reasons for an unreliable keyfob are batteries that are dead at 12 volts keys that aren't connected and require to be programmed again, or a malfunctioning chip. A defective electronic chip will hinder the key fob's ability to send an email to the vehicle's receiver module. The key fob can only start the engine of your Rolls Royce when it receives an indication from the chip.
Sometimes, tech-savvy thieves can hack a key fob that has a push button. These thieves are able to use artificial intelligent to detect the unique signal sent by the fob of the key and unlock or activate the ignition of your car. This type of hacking is becoming less frequent because security measures have been improved over time.
You can always contact a locksmith company in case you've lost the remote key to your Rolls Royce. They will create duplicates. An expert locksmith knows the specifics of each automobile model, including those with complicated central locking systems. This means that they can create a replica of the key fob of yours without damaging the original. They also offer an alternative that is less expensive than buying an alternative from a dealer. Autolocks LTD is a well-known company in the South East England that can provide top-quality service for all Rolls Royce models.